Hey Nick, im in the same boat. My 07 shadow from what I can tell uses the 600 single carb and a 750 engine. When looking at the performance packs for the bikes, I was comparing the images of both b...

Ok that's great information. Thanks! I'll do the turtle wax on the bars and tank. 👍🏼

Located in Westland, MI. I have most of the OEM parts, but it currently has fenders I made on it. It will run, but smokes like a mofo. I can send pics, to interested parties. Seeing if there's any ...

@Bry Guy 007 you can run car wax on gas tanks and parts that dont get hot, and reapply as needed. do not put anything on the exhaust though. the exhaust are stainles dont take anything like bluing,...

@02shadow600 congratulations, you got rid of the dummy lights! it's one of the first things i remove on pretty much every bike along with the speedo. You'll need to reinstall the speedo to gain eve...

I love the look of the raw steel tank and apes, but I don't want them to rust. I also bought the exhaust pipes from TJBC, but they are stainless so they should be good as is, I believe.  Asid...

I recently removed my speedometer on a 2002 shadow vt600, the bike still starts and runs but I lost my Neutral, brake/and taillights in the process. I'm wondering what wires I need to ground or con...

@Dakota Cook Yeah thats the jets for an 1100, All youll need to do is reach out to customer service and they can help you with that  

@Aaron Jackson heres the links to all the info we offer on tuning!  - https://shoptjbc.com/community/brutalforums/topic/176621/tuning-your-carbureted-honda-shadow-everything-you-need-to-know

@juriankwist we will keep the thread to help others. =) 

@Elliot Kraker its on the bototm of the carb. strongly recommend you  watch all this info for tuning so you dont damage anything - https://shoptjbc.com/community/brutalforums/topic/176621/tuni...

@Charles Austin there is no magic formula. this is called tuning ! heres a link to all the info you will need to properly tune - https://shoptjbc.com/community/brutalforums/topic/176621/tuning-your...

@eric brockling  Partzilla has part # 9, but the other two parts you will need ot hunt down. start searching on ebay for the part numbers and then use terms like VT1100 side cover. its a 3 pie...

@CallMeBeans yeah put a hose on it and route it to the outside lower frame of the bike, dont put anything on the end. 

I bought a carburetor performance kit for my Honda shadow 750 spirit and the main Jets that were sent in it was a 195 198 and 200 

I have installed performance carb rebuild kit' velocity stack' free flow exhaust, spark plugs, coil wires. The bike will not idle very well and is bogging when throttle is under 1/4 and is fouling ...

I put in the chinese tubes and they seem to work, i still have to fine tune it but im sure it will run well. Thank you for your reply TJ. This topic can be deleted.👍

Hello everyone! Im brand new to motorcycles and with being said I enjoy tinkering. I did the thing everyone does when they get a bike which is to make it loud! Now I have rejected and taken proper...

@CallMeBeans did you put two of the brass shims in with the one that came or just add a single brass shim?

I got the performance kit and put the pipes on and rebuilt the carbs. My question is what size jets did you use? I put the biggest jets in and with the velocity stacks and air mixture screws backed...