@DaLong bit the bullet and replaced the pump it as well as the filter and boy was that filter caked with gunk. The whirring went away and it performed better but still couldn't get to sixty with ou...
@DaLong bit the bullet and replaced the pump it as well as the filter and boy was that filter caked with gunk. The whirring went away and it performed better but still couldn't get to sixty with ou...
@DaLong The petcock is vacuum operated and seems to have sufficient flow. After looking into it I think it might be the fuel pump going bad. I took it out for another spin and there was a whirring ...
@DaLong 07vt1100c2 The bike is pretty much stock except for added running lights and the performance kit. I noticed before I did the performance kit it would start losing power on the top end of f...
Any help is appreciated I got this bike as a project bike so I can learn to work on them. I just rebuilt the carbs, added velocity stacks, and open pipes. In the process of trying to tune everythin...
@CallMeBeans did you put two of the brass shims in with the one that came or just add a single brass shim?
I got the performance kit and put the pipes on and rebuilt the carbs. My question is what size jets did you use? I put the biggest jets in and with the velocity stacks and air mixture screws backed...
Do the float needle set ups in the kit come with shims installed?
