MAX Performance Kit - Honda Shadow VT1100

The MAX Performance Kit for Honda Shadow VT1100's includes everything you'll need to achieve maximum performance and a premium riding experience while

SAVING OVER $200 DOLLARS!

INCLUDES:

• Exhaust set for VT1100 
• (And mounting hardware)
• Complete Carb Rebuild Kit for VT1100
• Two Dual Carb Velocity Stacks (And mounting hardware)
• Two Filtration Screens for Velocity Stacks
• Also includes FREE exhaust gaskets for VT1100!

FITS:

• 1987-1996 VT1100C Shadow
• 1997-2007 VT1100C Shadow Spirit
• 1995-1999 VT1100C2 Shadow ACE
• 1999 VT1100D2 Shadow ACE
• 2000-2007 VT1100C2 Sabre models
• 1998-2002 VT1100C3 Aero models
• 1998-2001 VT1100T ACE Tourer models

EXHAUST:

Our VT1100 Exhaust is a super-rad bolt on exhaust design that is unrestricted and will help you get the best performance out of your VT1100!  ** Only Stainless Exhaust has Internally Integrated Baffling**

Do not wrap these pipes, doing so will void the warranty as well as increase the chances of corrosion and failure.

VELOCITY STACKS:

If you remove the airbox components on a Honda Shadow with dual carbs, the carbs will have a hard time creating enough negative vacuum to pull in a steady flow of fuel from the pilot and main jet. The solution to this issue? Velocity Stacks! This allows the carburetors venturi to be lengthened enough so that the engine can maintain constant vacuum beyond the slide of each carb, as well as allow the air turbulence to be reduced. resulting in a much smoother delivery of air and fuel emulsification to your engine.

VT1100 PERFORMANCE CARB REBUILD KIT:

With our velocity stacks and/or exhaust you will definitely need to re-jet and tune your carb, and there is no better kit to do it with than this one!

Any time a change is made to exhaust or intake, a re-jet is necessary. Sometimes this change is subtle, other times, the change is more drastic, And there is no quick one size fits all formula, so tuning does mean you may need to pull the carbs a few times. we recommend a little grease on the intake boots to ease the installation and removal of the carbs. Nobody likes chafing! Lube helps!! 

This kit is meant to work with a free flowing velocity stack intake and a free flowing exhaust system. This is intended as a performance upgrade with velocity stacks and or/open exhaust and is not recommended for a stock intake/exhaust setup.
Not all carbs will require the vacuum plugs. your carbs may not have the nipples that need to be plugged. 

If you decide to put these on the early gen VT1100's with the two-piece right side, side covers, then you will need to remove the right side side cover to run these. This is why we do not advertise that they are a direct fit for anything not clearly stated in this description.