Extended Cable Kit (Throttle Pull and Clutch) - Honda VT750 Shadow Spirit (2001-2007)

$ 159.98
| /
These Extended Throttle and Clutch Cable kits for your Honda Shadow bobber or chopper are just what you need to get those...

These Extended Throttle and Clutch Cable kits for your Honda Shadow bobber or chopper are just what you need to get those super sick rabbit ears or buckhorns on yer scoot! These clutch and throttle cables are a tough black exterior sheath and lined with an inner nylon sleeve to help prolong cable life. Please bear in mind that all cables should be properly lubed prior to use and should be lubed regularly to avoid premature wear or rust. 

FITMENT: HONDA VT750DC/DCA/DCB SHADOW SPIRIT (2001-2007)

+2 stands for stock length PLUS 2 inches.
1 Cable Kit includes - 1 Clutch Cable and 1 Throttle Cable

Below are the extended lengths of Throttle cables for multiple years. This is by no means a substitute for using stock length cables attached to the bike to properly measure how much more cable you need, but you can also follow our cheapo method of measuring cables HERE:
 

WHEN MEASURING FOR LONGER CABLES - The best way to measure how much more length you need is to bolt the bars into your risers, then leave the stock clutch and throttle cables intact at the carb and motor then measure how much more length from the housing end you need over your stock cable lengths to reach your new bars.  There is no magic formula, there is no mathematical equation, there are just so many bars and different riser configurations, you will need to figure this out; we cannot do it for you. 

These Cables are meant to fit either stock controls and carbs or the single cable throttle assemblies we offer and stock carbs.

Cables cannot be returned so please measure VERY carefully! 
These cables will only fit the models listed. We are not held responsible if you buy this for your lawn mower and it doesn't work. 

We cannot warranty cables that have been damaged.  When you order this product you are ordering 1 clutch cable and 1 throttle cable

When connecting the throttle cable to the throttle drum (at the carburetor) do not torque past 1.5 ft-lbs or you will shear the threaded cable end off. We cannot warranty cables that have been damaged in this way.  When you order this product you are ordering 1 throttle pull cable. 

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Jacob

Great service as always the throttle cable fits really well but the clutch cable was kinda tight on 14 inch bars measurement mistake on my end still recommend

C
Chris

Great quality product