Hey bro, it looks like they sell a wide variety of risers on line with a list of bikes the item will fit on, but to your question, maybe?  It depends on the model of Aero.  It looks like ...

Hey bro, I'm not with TJ, but have you went through your carbs recently?  The pins on the float can wear over time allowing gas to leak by when it shouldn't.  So, when you open it up gas ...

Hey bro, not with TJ, but sputtering sounds like fuel not spark.  Have you checked the in line fuel filter?  Old tanks can send bad stuff down stream.  If you find rust sand in your ...

Hey bro, I'm not with TJ, but did you set the float at 9.2mm?!?  I had a similar issue.  I used a little metric ruler and went just under 10 mm, and my bike stopped pissing fuel out of th...

Also, after RE-reinstalling my carbs, I noticed, it would be WAY better if I had some choke knobs.  Just an observation.

Ok, so . . . the horse is off the sauce.  No longer pissing fuel, but still having issues.  She is running just fine at casual riding.  However, when I start trading gas for horse po...

Just got an 07 Aero with the one piece welded handlebars/risers.  Can I bolt on 08-16 or whatever Aero risers on this bike and change the bars?

@alex swindell what kind of bike is it? Mine is single carb, and doesn't have a fuel pump or any fuel regulator. 

hey my bike just caught on fire 12 months ago i now have it runing but only on 2 cylinders to start with i hade fule pooring out carby so iput a fule pump onto it and that stoped that out but know ...

@TJ also ordered a new float needle, float and hinge. Could the carb be getting too much fuel pressure not allowing the needle to seat?

I had some issues with rust.  Tank got so bad it passed my inline, so i had to replace the pump and clean the carbs.  I had no idea what I was doing.  And, youtube.  TJ videos r...

Also, I hate my choke cables.  Knobs would be great for a 2000 shadow 1100 tourer.  

Ok, I think I have figgured it out.  My floats were off.  I don't know yet, but they were slightly, maybe 4mm under.  Bent the tab down to raise the float.  Anyways, I set them ...

@TJ thank you

I am in the US but as TJ said, I have trust issues with a lot of things from eBay. I am looking for a reputable, quality carb kit or replacement for my shadow

Are you sure its a vulcan 650 from 2001?

I think i just found a good deal a 2001 vulcan 650 for 500 bucks. it has two brand new carbs on it. and after tags and title 1190. new tires as well. i think this is a good deal. and it is a good b...

 i bought a performance rebuild kit from you because my shadow 600 97 duel carb would Only sputer out like it was out of gas when in 4th gear installed the rebuild kit wil new carb boots and i...

Hey bro, I'm not with TJ, but there are a lot of media blaster tanks, sand or bead, with varying psi being pushed.  It may be ok, but to just remove the clear coat and be safe, maybe think of ...

I was wrong.  Fuel is being pissed out the top of the carb like a Russian race horse that just popped the seal on a case and a half of milwaukee's best.  Very glad I ran that hose back un...