@Jeff Coombs  Hey Jeff!  Sweet ride.  I have the same bike 2002 and thinking of TJ stacks.  Thanks for the jetting  info.  Have you had it up to highway speeds with n...

The previous owner wrapped the exhaust and left it for years. I unwrapped them and this is what it looks like:  . I've tried baking soda vinegar,  bar keepers friend,  0000 steel woo...

Good Friday to all. Just got my hands on this 2002 Honda Shadow Spirit VT1100C-A. Project is to rebuild for Bobber......Classic rear fender delete, ignition key & coolant reservoir relocation. ...

Recently purchased 2002 Honda Shadow Spirit VT1100C-A. Somone installed these Vance & Hines aftermarket exhausts w/baffels. They kept stock Air Cleaner, and stock carb setup. It runs, but front...

What I found out is the easiest way for me to do this if your fork piston keeps spinning is to place the spring and instead of the stock spacer, get yourself a longer pvc pipe 3/4" OD 2' long and s...

I.have a 01 vt750 and the person before me hacked up the harness and I was wanting to switch to the m.unit. it all seems stright forward beside the coils.  Has anyone done it and if so how do ...

Hello, I'm NumTom1. Originally NumTom. Now you have to add a number. I got a VT750DCB shadow spirit during the lockdown of 2020 to pass by time. got in to watching LnSpltBlvd for bobber ideas after...

@TJ Thank you very much!

@badluck13 can you post some pictures of the screw youre referring to? If its the air fuel mixture screw, it doesnt "tighten" down, you want to screw in till it gently stops. No pressure on it. If ...

@Michael Calloway here ya go!  - https://shoptjbc.com/products/aluminum-throttle-tube-for-honda-shadows?_pos=2&_sid=4a1f37037&_ss=r

I got a exhaust performance kit for my bike, and just rejetted the carb and I accidentally overtightened the long handled scew and broke one the washers so I was just gonna give it a shot with the ...

what throttle tube can i get to work with this I have 1in bars dont want to go with a metal grip thanks

@jjonesjjones1978 cant run these with nothing on the carbs. you need stacks on there or put the stock intake back together. 170 is insanely too big for that bike. 4 turns out on the air fuel mix sc...

@lasthandymanstanding i think you can find some chinese parts for them on ebay. look for a 1986 VT700 ICM. ( ignition control module) 

@TJ thanks 

I have a 97 600 that sat for 2 years. I removed the air box. Cleaned the carbs. Non ethinol only bike. Carbs were spotless. All diaphragms looked great. Jets looked great. I reinstalled the carbs. ...

@NumTom1 no the VT750, i recommend BEFORE You pull the fork cap and spacer and spring, you get the fork in a vise and loosen the fork piston bolt from the bottom, there is no tool or way to hold it...

Well craaaaaap haha. Well any suggestions on best place to get an ignitor/spark box?

I want to change out all the seals and other gibblets and fluids in my forks. Watched one of TJ's videos and saw he had a special tool for the 600's forks. Wouldn't the 750 forks need that special ...

@lasthandymanstanding it is a tariff year bike, they were made for a very short time to combat the tariffs during the reagan administration, we do not make anything for them, they are obsolete as a...