@Gnomeskull post pics!
@Amanda Sell are you sure you set the float hight correctly? ive seen people do this and they accidentally set the float to pretty much never open. also if you blocked off your float bowl vents the...
@Leonar Larios what do you mean reviews on questions?
@I Broke It the acerus works with your stock pull throttle cable. it goes in the same way the cable did on the stock housing. You dont need a longer cable for the acerus. but if you have different ...
@TJ , Thank you for responding! I have tried that once, but I used a much longer hose than was necessary for sure, and it traveled through the area under the air box that the pump normally sits in...
@Nick Romano fill it halfway and make sure your internal return line tip is cut at an angle and goes to the bottom of the tank.
@Gnomeskull yes!. they all have different steering necks though. the ace, spirit, aero, phantom, i already have some mostly developed but springer sources have completely dried up.
@Eelco Scholten what was the fix?
@Toki get an LED bulb. the headlight is fine but if you've got a compromised or crappy headlight you wont see anything. im personally not aware of any aftermarket headlights specifically for...
@Gnomeskull i wear a modified pantera snowmobile helmet. custom lined to fit my head. i also wear a Simpson Mod bandit. the biltwell 3/4 helmets are really decent, and affordable and dont...
@Ryan Alverman ok so you have a bunk carb? no fuel sputing out of the needle jet is not normal! LOl id get a stock carb on ebay. also. was the bike runnign fine before you modified it?
@Pavel thats up to you, we cannot sell the fuel controllers and i cant even buy one in california.
@Nicky Wee YOU NEED TO TUNE! LOL the kit is not just a slap it in and go! every bike needs something different so thats why we incluide multiple jet sizes! herres a link to all the tuning info...
@Parker Anstey you havent made any mention of actually tuning. the kit is not just a drop in kit, you need to correctly tune the bike or yes, you will have probnlems like youre mentioning. I would ...
@Rich it will not, because of the location of the rear master cylinder. they moved it on top of the engine case cover so now the backdraft will not fit.
@andreas Theres literally noithing to worry about unless youre fully submerged. so just dont drive it off a dock and youre good. lol
@andreas unfortunately at this point, theres no baseline. carbs have been separated, they are now out of sync, youve messed with adjustments, i cant really poiint ot what the issue could be b...
https://www.youtube.com/watch?v=_rIhGid0Ssg here ya go !
@TJ you ever consider doing a springer front end for 750's?