Replacement Stock Length Throttle Pull Cables - Honda Shadow VT600 VLX

$ 79.99
| /
These Cables for your Honda Shadow bobber or chopper are black and lined with an inner nylon sleeve to help prolong cable life....

These Cables for your Honda Shadow bobber or chopper are black and lined with an inner nylon sleeve to help prolong cable life. Please bear in mind that all cables should be properly lubed prior to use and should be lubed regularly to avoid premature wear or rust. 

These are the STOCK length cables!
Cables Sold Each - order QTY 1 for 1 throttle pull cable. 

We also sell the extended lengths of throttle cables for multiple years. If you need to measure for extended lengths you can also follow our cheapo method of measuring cables on our YouTube.

Throttle Pull 88-98 - 33"
Throttle Pull 99-07 - 34.25

WHEN MEASURING FOR LONGER CABLES - The best way to measure how much more length you need is to bolt the bars into your risers, then leave the stock clutch and throttle cables intact at the carb and motor then measure how much more length from the housing end you need over your stock cable lengths to reach your new bars.  There is no magic formula, there is no mathematical equation, there are just so many bars and different riser configurations, you will need to figure this out; we cannot do it for you. 

These Throttle Pull Cables are meant to fit either stock controls and carbs or the single cable throttle assemblies we offer and stock carbs. 

Cables cannot be returned so please measure VERY carefully! 
These cables will only fit the models listed. We are not held responsible if you buy this for your lawn mower and it doesn't work. 

When connecting the throttle cable to the throttle drum (at the carburetor) do not torque past 1.5 ft-lbs or you will shear the threaded cable end off. We cannot warranty cables that have been damaged in this way.  When you order this product you are ordering 1 throttle pull cable. 

Description