** Not all years require the block-off plates to remove the Air Injection System so figure that shit out! **
These plates allow you to remove your AIS (Air Induction System) or PAIR valve in a mardi-gras festive manner from your bike and cover the shitty little reed valve left on the top of your heads. That's right I said HEADS! These plates will get you more head than you can dream of! The AIS is an EPA-imposed pile of tubing, hoses and other tomfoolery horse shit that your bike doesn't need to run well , and really clutters up the top of the motor. All that shit can be tossed off a cliff, or stuffed into a turkey and deep fried! I made these plates so you can pull the system off the bike and block off the reed valves on top of each cylinder like a real pro.
There are two plates to a set, these will fit many models of VT750 up to 2003. If your VT750 has an EFI system instead of carbureted, you will need our PAIR Block-Off Plates.
If you are unsure if you need these or not, take a look at the pics. There is a pic of a stock aluminum piece with hose connected to it, if you have one of these on the top of each head cover, then you can remove them and replace with the AIS block off plates.
For some models of VT750, you will want to pull the reed valve out before installing the AIS plate.
Aluminum AIS Block-Off Plates are raw and may show small imperfections and markings that are inherent to the raw metal. They are raw aluminum, so you can pretty much scratch them by breathing on them. Not to worry, though! A little rub with a rag and aluminum polish, like Mother's brand, will clean 'em right up if that is the look you are going for. Otherwise, choose a set with a finish or just ride 'em RAAWWW!
Disclaimer** This product is intended for race track use only. Blah, blah, blah...