Fork Extensions
Fork Extensions
Fork Extensions
Fork Extensions
Fork Extensions
Fork Extensions
Fork Extensions

    Fork Extensions - Honda Shadow VT600 VLX Steed All Years

    $251.00 $391.00

      • Fitment
        Year Make Model
        1988+ Honda Shadow VLX 600 VT600C
        1988+ Honda Shadow VLX 600 VT600CD Deluxe
      • Shipping & Return Info
        • arrow

          Free Shipping on US orders over $299

        • arrow

          Orders Ship within 2 business days

        • arrow

          Hassle-Free Return Process

      The TJ BRUTAL CUSTOMS Fork Tube Extensions for Honda Shadow VT600 VLX Steed motorcycle forks are just what you need to turn that motorcycle into a mean highway cruiser! Extending the forks of a bike gives a bike a much more custom look, the handling at highway speeds is a bit more stable and it just looks cool as hell! 

      These fork extensions for Honda Shadow VT600 VLX add 6" to your forks and are machined from stainless steel, so they can be polished to a chrome-like finish to match your forks if you choose. 


      ***Don't see your model? See our other sizes here

      • Honda Shadow VT600 VLX Steed 1988 - 2007

      When it comes to putting a long front end on your Honda Motorcycle, we looked to the past chopper gods and resurrected an idea that's been around for ages, the fork extension or fork slug. 

      The fork extension lets you extend the front end of your motorcycle the simplest way possible using very few tools, and doesn't require messing with your forks internals!  Adding this additional rake to the Honda Shadow gives it a look and feel of pure mystical bad-a$$ery!


      • Lift the bike so only the front end is off the ground, let the front forks unload.
      • You may need to remove the brake line stay under the lower tree and brake caliper to prevent tearing the brake line.
      • If you have a speedometer, you may want to disconnect it from the hub as well. 
      • Loosen the fork pinch bolts on the top and bottom trees.
      • Slide the forks down through the top tree, but not all the way out of the bottom tree. 
      • Remove the stock fork caps carefully, they are under a little bit of spring pressure.
      • Remove the O-rings from your stock fork caps and install them on the threaded end of the fork extensions.
      • Using a little bit of fork oil, wipe a thin film on the threads of the fork extension. 
      • Once the forks are slid down through the lower tree far enough, and you can get the extension in between the upper and lower trees, to thread into the forks.
      • Thread them carefully as the threads are fine and cross threading will be a very expensive mistake. It often helps to rotate the extension counterclockwise slowly to feel where the threads begin. (somatosensory precision!) NOTE: the threads may sometimes collect debris in packaging and manufacturing. It is IMPERATIVE that the threads on the extension are 100% free of any debris, the threads are very fine and will bind quite easily if there is debris on them. Blasting the threads with brakleen and then inspecting and brushing with a clean toothbrush can remove debris. 
      • once the fork extensions have been threaded in, you can use a #2 Phillips screwdriver in the 1/4 " hole at t he top of the fork extensions to snug them down. 
      • Repeat for both side of the forks. 
      • Slide the extensions up into the top tree, 
      • Tighten all pinch bolts. - Top pinch bolts to  8ft-lb, Lower pinch bolts to 36ft-lb
      • Ride fast, take chances easy rider! 
      **These are intended for choppers. which typically aren't running tomfoolery such as speedometers and brakes. however if you want to run a front brake or a speedometer you will need to get longer lines if you want to run these extensions. 

      Customer Reviews

      Based on 12 reviews
      Arnaud Pivato
      Au top du top 👊🏼

      Qualité et finition irréprochable!
      Je recommande absolument.

      Anthony Siciak
      Get yourself a chopper

      Picked the extensions up a week ago. Great quality. After getting my bike jack from a friend, I set to work. Super easy install don’t have a garage anymore so parking lot mechanic at its best. Was able to do the install all by myself no problems whatsoever. Tighten everything up and BOOM! almost done with the never ending project. Only issue if you consider it an issue. Had to remove the front brake with the bunny ear handle bars I have. At least till I get a new one. Thanks TJ, now stop sending me emails. I can’t spend anyone more money. Here’s some before and after pictures

      Sam Torp
      10/10 shits dope

      If you don't want new forks/ different inserts just pull the trigger

      Zach Carroll
      Fork extension with tjb steel seat, tjb carb performance kit and mono strut

      Tjbc your company and products are hands down 10/10 worth the money an love the way everything looks. Thank you again for making badass Honda Shadow parts!

      Mikkel Hougaard

      Completely changes the stance and feel of your bike, easy install and only need Longer break Line and i had to relocate the speedo