@TJ so i have the backdraft exhaust and velocity stack. At sea level in savannah,GA I've replaced the ignition wires going to the coils and new spark plugs and plug wires. Have good blue spar...
@TJ so i have the backdraft exhaust and velocity stack. At sea level in savannah,GA I've replaced the ignition wires going to the coils and new spark plugs and plug wires. Have good blue spar...
@TJ So I've have gone by the sheet and videos. Was still running rich. Coorect me if i am wrong,I figured out that since im running a shorty choke knob and my factory choke has a needle on i...
Hi yall So I've rebuilt the carbs with the rebuild kit using the 48 pilot and 142 main. I am at sea level. My issue is I can find a good idle. Seems to be flooding. I have the fuel mixture screw s...
Hello all, so I finally got my bike put backtogether. Try to start the bike. Was successfull but couldnt keep a idle. So I tried adjustment the fuel mix screw to 3 turn outs. Still nothing checked ...
So I'm rebuilding a wiring harness for vt600. I'm using a motogadget m-unit to cut down on some of the clutter. Question I have is do I need the neutral and clutch safety wires coming from the cdi ...
