FREE SHIPPING! Domestic Orders Over $199.99

Throttle Pull Cables - Honda Shadow VT600 VLX

Regular price $ 52.23 New Price

Motion Pro cables are made in the USA and made to last! Simply the best name in custom control cables for your Honda shadow

Cables are available in -
- Armor Coat which is a Stainless steel weave with a clear outer coating to protect your rust bucket from scrapes.
- Black Vinyl Coil Wound lines with an inner nylon sleeve to prolong cable life.
Please bear in mind that all cables should be properly lubed prior to use and should be lubed regularly to avoid premature wear or rust.

Black - Black Vinyl
AC - Armor Coat Stainless
+2 stands for stock length plus 2 inches etc.

This is by no means a substitute for using stock length cables attached to the bike to properly measure how much more cable you need, but these are the stock lengths of clutch and throttle cables for multiple years -
Clutch 88-98 - 44.1" 
Clutch 99-07 - 38.58"

Throttle Pull 88-98 - 33"
Throttle Pull 99-07 - 34.25

WHEN MEASURING FOR LONGER CABLES - The best way to measure how much more length you need is to bolt the bars into your risers, then leave the stock clutch and throttle cables intact at the carb and motor then measure how much more length from the housing end you need over your stock cable lengths to reach your new bars.  There is no magic formula, there is no mathematical equation, there are just so many bars and different riser configurations, you will need to figure this out, we cannot do it for you. 

These are meant to fit stock controls and carbs or the single cable throttle assemblies and stock carbs.

These may fit other years and models, If you are unsure, you will want to cross reference before you order. 

When connecting the throttle cable to the throttle drum (at the carburetor) do not torque past 1.5 ft-lbs or you will shear the threaded cable end off. We cannot warranty cables that have been damaged in this way. PLBV