I just want to say I buy pretty much all of my motorcycle parts from tj. Every thing is made with great quality. I bought the max performance kit with the high low drag exhaust for my 2007 Honda shadow 600vlx. I did the vacuum delete and afp delete as well. I went ahead and bought the short choke knob as well bc it was recommended instead of the oem choke. It looked great and it was easier to pull. Little did I know just recently after 4 months of trying to tune the bike and numerous amounts of spark plugs that were caked in black soot and taking the carbs off to try and rejet it or even go back to stock jets, nothing worked. For anyone having an issue with the 600vlx running extremely rich it is the shorty choke knob if you installed. I haven’t seen anybody post or write anything about it but use the factory choke knob for tuning. It all made sense. The shorty choke knob doesn’t have the needle on the end to close off fuel flow like the factory one. Maybe for other models the shorty choke knob would work but for my instance the single carb 600 was a tuning nightmare just because of the knob. Runs perfectly with the factory choke! Im using no shims on the diaphragm needle, 48 pilot jet and 142 main jet. Love how the pipes sound now!

I bought this under the impression it’d work with an aero 750 factory tank. It works great, just can’t reach it. Should maybe not that in the description.

I have a vlx 600 carburetor (16100-MZ8-U43) has a spiked choke, it will make your bike run extremely rich and die. Wasted money.

Being a newbie to this end of repair, having to pull the carb a bazillion times, led to a frustrating game of tug-o-war with connecting an abysmally long choke cable. So, these shorties saved trips to the pharmacy and work perfect.

The Shorty Choke Knob is a small detail that makes a big difference. Super easy to install, way cleaner than the stock setup, and gives the carb area that custom, minimalist look. Love the feel and quality — TJ Brutal always delivers with parts that just work and look damn good doing it

This is just what you need to put everything on the same side as the carb it cleans the bike up and works flawlessly! Grate products as usual thanks for making things easy and clean for a first time bike builder!

I bought the dual carb choke setup.
Perfect fit. Works great. Left side needed to be modified so not to hit the throttle cable cam. Very happy with results. Recommended !!

Cleaned up the left side. Relocated the idle adjuster while I was at it. Happy times!

This is the 2nd set of choke knobs I have purchased. I have 2 Shadow VT 1100c's.One is bobbed and the other is being built out as a short chop. These knobs work great and in two years I have had no issues with them. They do the job with style.

So much cleaner than the long stock cables. These complete the look I was going for! Nice and clean 👌🏼

Always nice to upgrade especially when your essentially building your bike from just a frame

Luv it

Easy install, excellent quality, and came with a cool decal! “It’s not a bobber baby, its a chopper”

Fits and works great on my VT1100!

Exactly as described and worked perfectly

Good quality!

Nothing bad glad to be done with the cable . Only thing i did was had to grind a flat spot so it would clear the throttle drum or cam whatever you call it . Looks Great !!! Such a piece of mind not worrying bout the cable snapping anymore.🤘🏻👍🏼& sent me a sticker 🤙🏻

Choke cable broke on my '83 750c (no surprise as it was the original) since it's a 6mm no replacement is made unless you find a NOS. These shorty's saved me and my wallet. Install was a breeze and took 5 minutes, knows lock out as they should and bike high idles until they're pushed back in. 10/10 recommend and plan on installing on a '85 700 project i have.

I have a 2008 honda shadow vt750 spirit i put the shorty choke knob on and the plunger wouldn’t sit perfectly in the carburetor so i had to add another spring to add more tension and had to cut a piece off the top rubber on the shorty choke knob. Finally i got it to seat in the carb perfectly but it didnt fit as advertised

Perfect fit on 2002 VT750CDC

Simple and clean..less clutter..

These look great on my carburetors along with everything else TJBrutalCustoms has to offer for the Shadow 750

These work great on my dual carb VT600. The single cable worked fine but these look cleaner!

Purchased these knobs to go with the TJB velocity stacks and performance rebuild kit. At first I was disappointed with the item until I ACTUALLY read the details and realized what I was doing wrong.(I'm a noob) Everything I bought to date from TJB has not disappointed me. Only critic would be customer support should know how to answer product related questions to all your parts.

AWESOME PRODUCT!

Una disculpa ya que no hablo inglés quisiera saber si me pudieran ayudar si su producto es compatible con una Honda shadow VT700C de 1984,fabricada para USA, ya que es justo lo que necesito y resolvería mi problema muchas gracias bonita noche.