Complete Performance Carb Rebuild and Tuning Kit - Honda Shadow VT600 VLX 1999-2007 Single Carb

Name: Complete Performance Carb Rebuild and Tuning Kit - Honda Shadow VT600 VLX 1999-2007 Single Carb
Brand: TJ Brutal Customs
SKU: TJ00206
Price: 240.00 AUD
Availability: InStock

$240.00

This Complete Performance Rebuild Kit is the only carburetor rebuild kit that includes literally everything you need to get your carburetors in the absolute best performing condition!
If you pick up one of these rebuild kits you do NOT need a Performance Tuning Kit as well.
Your carburetor can be a daunting task and even more so when you don't have the proper parts. That great barn find that has 200 miles on it has been sitting with carbs full of ancient fossil fuels for 15 years and now she's yours. Why mess around with trying to use corroded parts and old rubber seals when you can easily replace them and eliminate these parts as a source of tuning headaches?!?! With this kit you can rebuild your own carbs to better than new condition!

This Kit Fits:

Honda Shadow VT600, VLX, Steed 1999- 2007 (single carb models ONLY)

Does not fit VT700 or VT500 models.
This kit is intended to work with our velocity stacks and exhaust for VT600 carbureted models. This kit may work with other aftermarket intakes and aftermarket exhaust systems that are more free flowing than stock.

Kit contains -

Qty 1 Float Needle
Qty 1 Stainless Bolt Replacement Kit
Qty 1 AFP Stainless Plug
Qty 1 D Bit (to remove the stock Air/Fuel Mix Screw)
Qty 1 A/F Long Handle Mix Screw
Qty 1 Single Carb Slide Assembly
Qty 1 Vacuum Plug kit
Qty 1 Performance Jet Kit which includes:
Main Jets - 1 of each - 142, 145, 148, 150
Pilot Jets - 1 of each - 48, 50
Qty 2 Needle Shims
Click here for our online tuning sheet, complete with carburetor diagram for throttle stage reference!

You will need to remove the two plastic retainer rings on your stock slide in order to install the new diaphragms. A small set of dikes is all that's needed to clip them off. Install the diaphragm gently from the top of the slide. Be careful they can tear easily if you muscle them too hard or install them from the bottom. This diaphragm will hold itself in place in the channel at the top of your slide. When re-installing your slides, make sure the vent hole at the bottom of the slide is facing the cylinder head side of the carb.

Be very careful when installing these diaphragms, they are fragile and soft and can tear very easily.
Once the old diaphragm is removed, install the new diaphragm from the top of the slide don't attempt to shove the thing up from the bottom of the slide. This will guarantee you tear the slide! Use your fingernail to gently push the inner rib into the channel at the top of the slide. again the key word here is GENTLE!

We will work quickly to ship your order as soon as possible. Once your order has shipped, you will receive an email with further information. Delivery times vary depending on your location.

Free Shipping on US orders over $899
Orders Ship within 2 business days
Hassle-Free Return Process

High quality parts and step by step instructions helped me stay confident through the rebuild.
Bike really feels like it can breathe again!
It now runs like new and it's easier than ever to tune up.

5 stars: 34 (87%)
4 stars: 3 (8%)
3 stars: 1 (3%)
2 stars: 1 (3%)
1 star: 0 (0%)

I expected better quality

I bought the complete performance carb rebuild kit for a Honda shadow vt600. When doing the tunning i noticed machining Burr's in 2 of the main jet that came with the kit and the vacuum plug were less the desirable

Gave my bike new life

Bike really feels like it can breathe again!

Great product. It’s pricey but you’re paying for the convince of having it all right there. You’re not chancing buying counterfeit parts so you know the jets, gasket, everything needed is going to be correct. Also let’s talk about the instructional videos and how handy they are.

Simple-Even for a beginner

I am NOT mechanically inclined nor do I have a large set of knowledge or tools. However, this kit coupled with the 2 part disassemble/reassemble videos made this process very easy. High quality parts and step by step instructions helped me stay confident through the rebuild. I have already ordered more parts from TJ Brutal and have plans to keep ordering. Thanks!

It’s purposely built for your bike👌🏽

This kit was everything I needed to tune my VLX 600 after installing velocity stacks and cutting out the baff….AND upgrading the fuel screw……AND had the D-nut tool to remove stock fuel screw. Thanks TJ

The Solution to your Problem

Bought this kit for my 2006 shadow VLX 600CD. It had sat for over 10 years since it had last ran. After trying to skimp by with the ok looking original parts, but I ended up buying this kit and it fixed all the issues I had. It now runs like new and it’s easier than ever to tune up. Along with the YouTube video TJ has it makes the whole process a breeze. Can’t recommend this kit enough you get what you pay for in terms of quality and support.

Carb kit is great

Thanks for a wonderful product and good videos work grate thanks for making my first build fun!!

Everything works great!!!

We purchased the single carb rebuild kit and velocity stack. We watched the videos. We removed all the vacuum system that wasn’t needed and now the bike cranks over on the first push of the button. We will purchase more from TJ Burtal Customs.

SUCCESS!

Fought all summer trying to tune my sons shadow, you had to rev it up and ride the clutch to get it to take off. Installed this carb kit and the issue is fixed. Oh, this thing is a runner now!

Inside job

Someone put thought into this, organized it, and made it available to me. Super easy replacement. If only I could change my insides so easily. 5 star deal.

Perfect product

With building my first bike the carb seemed like a daunting task. Between this kit and TJs YouTube videos, it made this far easier then I expected. Super quick easy install, works perfect.

This bike runs perfect!

Very simple and straightforward install. It eliminated a lean condition causing a host of issues. I'm running velocity stack and open exhaust. A must have for tuning. Highly recommend new throttle intake boot while your at it, it'll save you possible headaches.

MY FIRST

This kit is very straight forward and exactly what the bike needed. First time I’ve ever rebuilt a carburetor and truly understand how they work now. Thanks a bunch for the instructional videos as well. I’m learning quite a bit and saving money by DIY.

Only The Best

Another great purchase from TJBC. Got my bike running amazing. Took some time figuring out what jets it liked… but we got there. And idles and rides like a dream meow!!

Carb Rebuild Kit

The kit worked great for my 99 VLX. Exactly what I needed for velocity stack and open pipes.

Carb rebuild with velocity stack

Great hardware, definitely brings life to my bike
I appreciate B R U T A L

Complete

Complete kit. Easy install. Great price for quality! Thanks!

I feel like a bona-fide chopper mechanic!

I've rebuilt several vw carbs but never ventured into jetting. Since I had an open exhaust and velocity stack and my bike was running rougher then I like I felt I should Crack open the carb for the 1st time. With video guidance I made quick work of rebuilding and tuning my carb! Kit had everything I needed and some, it arrived lightning fast. Of all the carb kits out there I feel I made the best choice.

Fixed!

My carbs were so dirty and needed a rebuild, after getting her all cleaned out this kit helped so much, easy to tune and adjust as needed

Like Butter!!

Bought an 03 VT600CD that needed carb work, decided to go with the performance carb rebuild to pair it with the velocity stacks, first time taking apart a carburetor , followed TJ's tips and videos and got it to start up right away. I have stock exhaust so I used the lower number for the pilot and main jet. The bike is running flawlessly and starts right up like never before.